Short answer
Carpenters in Australian metro areas typically charge $75 to $110 an hour plus a call-out fee of $60 to $90. Regional hourly rates are often lower ($65 to $95), but travel and call-out charges can offset that. Use the estimator below for common jobs.
Aussie carpenters typically charge $75-$110/hour in metro areas, plus a $60-$90 call-out fee. Regional hourly rates are often somewhat lower, but travel and call-out charges can offset that, so treat regional figures as a rough guide. This page has an instant job estimator (call-out + labour + materials for common jobs) plus real 2026 rates by city and typical prices for the 8 most-requested jobs.
Instant job estimator
Estimate only. Get at least 2-3 written quotes before committing.
Rates by city and job type
Hourly rates by area
| Area | Hourly rate | Call-out fee |
|---|---|---|
| Sydney, Melbourne, Brisbane, Perth, Adelaide (metro) | $75-$110/hr | $60-$90 |
| Regional Australia | $65-$95/hr | $40-$70 |
Typical job prices (2026 metro rates)
| Job | Time | Metro price (all in) |
|---|---|---|
| Internal door hang | 1-2 hrs | $215 – $560 |
| Skirting board (per lm) | 0.12-0.3 hrs | $15 – $50 |
| Built-in wardrobe (per lm) | 6-13 hrs | $800 – $2,430 |
| Deck (per m2, treated pine) | 1.1-1.8 hrs | $208 – $398 |
| Deck (per m2, merbau or hardwood) | 1.2-2 hrs | $290 – $550 |
| Pergola (basic 3m x 4m) | 12-24 hrs | $2,460 – $6,730 |
| Timber flooring install (per m2, labour only) | 0.5-0.7 hrs | $42 – $87 |
| Window / door frame replace | 4-8 hrs | $660 – $1,870 |
Single-visit job prices include call-out, labour, and materials at metro rates; per-unit rates (per m2, per metre or per light) don't add a call-out. Regional hourly rates are often lower, but travel and call-out charges can offset that. Emergency and after-hours work adds 50-100%.
What affects the price
- Location: Sydney and Melbourne metro run 10-20% above the national average. Perth rates can be comparable to the eastern capitals. Regional hourly rates are often 10-15% below metro, though travel and call-out charges can be higher.
- Access: Multi-storey work, tight ceiling cavities, or roof access add 20-40%.
- Materials quality: Budget vs premium fixtures can double the materials portion of a quote.
- After-hours or emergency: Weekend, evening, or emergency call-outs add 50-100% to hourly rates.
- Compliance and certification: Some jobs require a compliance certificate (called a Certificate of Compliance, Certificate of Electrical Safety or plumbing compliance certificate depending on your state and trade), which adds paperwork time.
- Waste disposal: Debris, old materials, and packaging removal is usually charged separately unless quoted upfront.
Licensing and compliance
Carpentry work needs a licence once the job value passes your state's threshold: about $5,000 in NSW (where carpentry includes doors, windows and floors), $3,300 in Queensland (a QBCC carpentry licence), and around $10,000 in Victoria, where a registered builder is needed. Thresholds and licence classes vary, so check with your state regulator.
How to compare carpenters quotes
- Get at least 2-3 written quotes - verbal quotes are unenforceable and almost always end up higher.
- Ask each tradesperson to itemise: call-out, labour hours, materials, waste disposal, GST. Lump-sum quotes hide markup.
- Check the licence number on the state authority's website (NSW Fair Trading, the Victorian Building and Plumbing Commission (formerly the VBA), or the QBCC in Queensland). Without a valid licence you may have no insurance or statutory protection.
- Ask about waste disposal and site protection - these are the two things most often missed and cause price disputes later.
- Know the deposit cap. For regulated residential building work it is 10% in NSW, and 10% under $20,000 (5% from $20,000) in Victoria and Queensland. Never pay in full before work is complete.
→ Use our free quote comparator to spot missing items, cash-only red flags, and unfair deposit demands across your 2-3 quotes.
Frequently asked questions
Do I really need 2-3 quotes?
Yes. Prices for the same job can vary widely between tradespeople, so getting two or three quotes is one of the most effective ways to check you are not overpaying.
Can I get a discount for cash?
You can ask, but cash-only or "no GST" offers are a red flag. Cash-only tradespeople often have no insurance, no licence protection, and no recourse if the job goes wrong. The 10% you save is usually not worth the risk.
What is an emergency or after-hours rate?
Weekends, evenings, public holidays, and emergency call-outs typically add 50-100% to the hourly rate. Some trades have a flat "after-hours call-out" of $150-300 on top of the normal call-out.
Are apprentice or junior rates cheaper?
Yes - apprentices are usually billed at a lower rate than a licensed tradesperson, but they must be supervised by a licensed tradesperson for regulated work. For simple jobs an experienced apprentice can be a good option; for regulated work (electrical, plumbing, gas) the supervisor's time is usually billed too.
Should I check they have insurance?
Yes - ask for their public liability insurance certificate before work starts and check the amount of cover. If a tradesperson damages your property or injures themselves on your site, their insurance is what stops it becoming your bill.
Do quotes include GST?
Legally-compliant quotes must show whether prices include GST. A quote without a GST line and without an ABN is a warning sign - the tradesperson may not be legitimately registered.
Is the call-out fee separate from labour?
Usually yes. The call-out fee covers the tradesperson getting to your site and the first 15-30 minutes of assessment. Labour hours start once actual work begins. Always confirm this in writing.
Related tools
- Renovation Quote Comparator - paste your quotes and get red-flag analysis
- Renovation Budget Tracker - track total spend against category budgets
- Materials Calculator - how much paint, tile, or flooring you actually need
Related reading: How to Paint Interior Doors: Cost & Guide (2026) (how to paint interior doors and what it costs).
Stay in the loop
One short email per month with what's changed in Australian trade rates and renovation pricing. No spam.